Fujitsu Fault Symptom Codes M2488 Product Guide, Table D-2. Formatter Error Recovery, 3CCA

FAULT SYMPTOM CODES			M2488 PRODUCT GUIDE
		Table D-1. Error Recovery (Continued)
	F.S.C #	DESCRIPTION
	3CCA	REQ/ACK error in DATA phase, retries failed
	3CCB	REQ/ACK timed-out in DATA, retries failed
	3CE0	Buffer error reported
	3CE1	Compression error reported
	3CE2	ADT timeout
	3CE3	Packet Processor error
	3CE4	Packet expanded greater than maximum
	3CE5	Bid not found in packet group
	3CE6	Unable to read packet header
	3CE7	Unable to read block forward
	3CE8	Unable to rewrite packet header
	3CF0	ADT error
	3CF1	Buffer detected error
	3CF2	Compression error
		Table D-2. Formatter Error Recovery
				BYTES
	F.S.C. #	DESCRIPTION	E.R.P.A.	29-39
				GROUP
	8004	Unknown cause write trap	47	03
	8170	Byte count not zero	47	03
	83xx	Write FMT error reg (WER not zero), xx	22	03
		bit 0 - Don’t care
		bit 1 - Customer data CRC error
		bit 2 - CRC write error
		bit 3 - DRC write error
		bit 4 - VRC write error
		bit 5 - Write formatter path error
		bit 6 - Write trigger VRC error
		bit 7 - Don’t care
	8400	Can’t reset RBE	25	01
	8420	Can’t detect RDEND	25	01
	8440	Can’t reset WER register	25	03
	8600	Can’t reset RDE, CRS or WES register	25	01
	8700	PHOK time-out after DBOB (WRITE)	25	04

D-2 CG00000-011503 REV. A April 1997