Fujitsu manual CHK XX Error Codes M2488 Product Guide, Table E-1 CHK xx Error Code Descriptions

CHK XX ERROR CODES			M2488 PRODUCT GUIDE
		Table E-1.	CHK xx Error Code Descriptions (Continued)
	CHK XX		DESCRIPTION
	CODE
	29	CLEANING CARTRIDGE SENSOR FAILURE IN POWER UP
	2A	CATCH ARM OPEN TIMEOUT ERROR
	2B	CATCH ARM CLOSE RETRIES EXHAUSTED
	2C	CATCH ARM OPEN RETRIES EXHAUSTED
	2D	CATCH ARM OPEN AND CLOSE SENSOR BOTH ON
	2F	UNDEFINED INTERNAL COMMAND
	30	FEEDER MOVE FORWARD RETRIES EXHAUSTED
	31	FEEDER MOVE BACKWARD RETRIES EXHAUSTED
	32	CARTRIDGE POSITIONED ON CARRIER INCORRECTLY
	33	MOTION COMMAND DURING SERVO OFF
	34	TOO LONG LENGTH TAPE LOADED
	36	CARRIER SENSORS: FRONT/REAR AND UNFEED ALL ON
	37	OUT OF RANGE IN EOT LOCATION TABLE
	38	CARRIER SENSORS: FRONT/UNFEED SENSORS BOTH ON
	39	TOO LOOSE WRAP TAPE CTG IS LOADED OR ABNORMAL REEL CLUTCHING
	3A	REAR CARRIER SENSOR ALWAYS ON
	3B	UNFEED SENSOR ALWAYS ON
	3D	WRITE TYPE COMMAND WITH FILEPROTECT
	3E	FRONT CARRIER SENSOR ALWAYS ON
	3F	UNFEED SENSOR NOT ON
	40	LOADER MOTION TIME OUT
	41	TAPE PATH SENSOR <CT> & <MR> BOTH ON
	43	LEADER BLOCK CANNOT BE PULLED OUT FROM CART.
	44	CARTRIDGE LOAD RETRY EXHAUSTED
	45	TAPE THREAD RETRY EXHAUSTED
	46	TAPE PATH HOME SENSOR ALWAYS ON ERROR
	47	THREADER ARM CANNOT MOVE TO HOME POSITION AT POWER UP
	48	CARTRIDGE NOT EJECTED
	49	TOO LOOSE OR BROKEN TAPE IS LOADED
	4A	THREADING TIMEOUT
	4B	UNTHREAD TIME OUT

E-2 CG00000-011503 REV. A April 1997