Fujitsu M2488 manual Table D-2. Formatter Error Recovery

M2488 PRODUCT GUIDE			FAULT SYMPTOM CODES
		Table D-2. Formatter Error Recovery (Continued)
				BYTES
	F.S.C. #	DESCRIPTION	E.R.P.A.	29-39
				GROUP
	9192	Drop-out length over after DTM and IBG	25	04
	9194	Can’t detect regular DERS length	25	04
	9196	BOB or DTM length over after DERS and IBG ???	25	04
	9198	DBOB off after BOB detected	25	04
	919A	Abnormal TM format (No continuous)	25	04
	919B	Abnormal ERS format	25	04
	91B0	Can’t detect regular WRAP length	25	04
	91BA	Write Wrap Marks failed	25	04
	92xx	Detect SRCK after DPRE : xx =	25	01
		Bit 0 - Uncorrectable error
		Bit 1 - Multiple track error
		Bit 2 - Skew error
		Bit 3 - Drop out error
		Bit 4 - CRC error
		Bit 5 - Postamble error
		Bit 6 - Start read check
		Bit 7 - End of data check
		(Bit 0 = MSB, Bit 7 = LSB)
	9400	EFME and RSYE detected at RBE	25	01
	9500	Can’t start RSVP	47	04
	9600	Can’t detect (I-1) block at WR, WTM, and ERS	25	04
	9610	Slow end after I-1 block	25	04
	9620	BID Miscompare on write	25	07
	9630	WRE and FWRE not equal at	25	01
	9802	Tape Mark found on Space Block	C0	08
	9803	File Protected Tape	30	01
	9900	Out of data block sequence	23	07
	9910	RDEND time-out after DPOST is detected	23	04
	9921	Invalid WRAP Mark	25	04
	9922	WRAP Mark detected on 18 track tape	2E	04
	9930	Not capable	2E	04
	9940	IBG not detected	25	01
	9960	IBG not detected	41	01
	9970	Data block not found	44	08

April 1997 CG00000-011503 REV. A D-5