Adaptec 2200S, 2120S manual Controlling Arcpd for Windows, Controlling Arcpd for Unix and Linux

Adaptec Storage Manager-Browser Edition

Enabling and Configuring the Notifier Service

Before you begin to configure e-mail notification you need to have the following information available:

■The SMTP mail server host name or IP address.

■The port that SMTP mail server is configured to use. The default value of 25 was chosen because it is the default for most SMTP mail server packages. If you are unsure ask your e-mail administrator.

■The SMTP e-mail address to which all returned e-mail should be forwarded. SMTP e-mail addresses take the form myname@companyname.com.

■The SMTP e-mail address of all users that need to receive event notifications.

Before you configure the notifier be sure the notifier service and ARCPD are stopped.

Controlling ARCPD for Windows 2000

To stop the ARCPD for Windows 2000, right click My Computer > Manage > Service and Applications > then right click Adaptec Web Server > Stop > Yes. This will also stop the Adaptec Storage Manager Notifier.

To restart, repeat the process above for both the Adaptec Web Server and the Adaptec Storage Manager Notifier and click Start instead of Stop.

Controlling ARCPD for Unix and Linux

The ARCPD starts automatically in both Unix and Linux. To stop the ARCPD, in the /opt/Adaptec/SMBE/etc prompt, type Daemon stop.

To restart, type Daemon restart (as it appears in the list of selections in /opt/Adaptec/SMBE/etc).

3-31