Using the Command Line Interface
Controller Commands
The following commands are used to display the status of a variety of controller attributes and to perform such tasks as pausing and resuming I/O and enabling or disabling automatic failover.
Command Summary:
controller details
Shows details about the open controller and software.
controller firmware compare [/C{controller_ID}] [{controller_ID}...] [/D{UFI_file_path}]
Compares the contents of each of the flash components on a controller to the corresponding image in user flash image (UFI) files and indicates whether they match.
Switches
controller firmware save [/C{controller_ID}] [{controller_ID}...] [/D{UFI_file_path}]
Saves the contents of a controller’s flash in user flash image (UFI) files.
Switches
controller firmware update [/C{controller_ID}] [{controller_ID}...] [/D{UFI_file_path}]
Updates a controller’s flash components from the flash image data in a pair of user flash image (UFI) files.
Switches
