Q-Logic FC HBA CLI manual Show Parameter Settings, Update Device Driver

5– Non-interactive Commands Command Summary

S

HBA Instance = HBA number (use -gcommand to find) HBA WWPN = World wide port name

-rg = Flash region update mode (4GB HBAs onlya): fw = Update firmware only

boot = Update bootcode only (BIOS/FCode/EFI image)

all = Update all regions (BIOS/FCode/EFI) depending on the Flash image.

BIOS/FCode File = Name or path of file continuing update BIOS/FCode Name

aRegion update only supported on QLA/QLE/QMC246x HBAs.

To save the BIOS/FCode to a file, type:

#scli -b (<HBA Instance> <HBA WWPN>) SAVE <BIOS/FCode File Name>

Where:

HBA Instance = HBA number (use -gcommand to find)

HBA WWPN = World wide port name of the HBA

BIOS/FCode File = File name or a path to a file in which to save BIOS/FCode

Name

5.3.3

-c

(Show Parameter Settings)

Use the -ccommand to show the parameter settings for all HBAs in the system:

#scli -c [ <all> ]

To show the parameter settings for a specific HBA, type:

#scli -c (<HBA Instance> <HBA WWPN>)

Where:

HBA Instance = HBA number (use -gcommand to find)

HBA WWPN = World wide port name of the HBA

5.3.4

-d

(Update Device Driver)

Use the -dcommand to update the HBA’s device driver:

scli -d <File Name>

5-8 SN0054614-00 F