Q-Logic FC HBA CLI manual Lun id view ? Hba instance hba wwpn

A

E – Help Commands

Table E-1. Help Commands (Continued)

Command	Arguments	Function
Line
Action
–ls	( <hba instance> <hba wwpn> )	Shows the current link status on an HBA port.
	{ ( <param name> <param
	alias> ) <param value> }
–m	( <hba instance> <hba wwpn> )	Views selective LUN information of all devices
	( view ? )	attached to an HBA port.
–m	( <hba instance> <hba wwpn> )	Views selective LUN information of a single
	<target wwnn> <target wwpn>	device attached to an HBA port.
	<lun id> ( view ? )
–m	( <hba instance> <hba wwpn> )	Configures all LUNs of a device attached to an
	select enable <target wwnn>	HBA port (Enable).
	<target wwpn>
–m	( <hba instance> <hba wwpn> )	Configures all LUNs of all devices attached to
	select all	an HBA port (Enable).
–m	( <hba instance> <hba wwpn> )	Configures all LUNs of all devices attached to
	unselect disable <target	an HBA port (Disable).
	wwnn> <target wwpn>
–m	( <hba instance> <hba wwpn> )	Configures all LUNs of all devices attached to
	unselect all	an HBA port (Disable).
–m	( <hba instance> <hba wwpn>)	Configures individual LUN of a device attached
	{ <target wwnn> <target wwpn>	to an HBA port.
	<lun id> (0 1 enable
	select unselect ) }
–n	( <hba instance> <hba wwpn> )	Modifies the HBA Parameters of an HBA port.
	{ ( <param name> <param
	alias> ) <param value> }
–n	( <hba instance> <hba wwpn>	Sets the HBA Parameters of an HBA port with
	<all> ) <OEM name>	a pre-defined OEM default templates.
–n	( <hba instance> <hba wwpn>	Restores the HBA Parameters of an HBA port
	<all> ) default	to factory default settings (4Gb HBAs or lat-
		est).
–o	<file name>	Writes the output to a named file. This option
		can be combined with other options. However,
		this option must be at the beginning or at the
		end of the command line.

SN0054614-00 F E-5