Q-Logic FC HBA CLI Link Statistics, XML Format 2 for the link statistics option is as follows

B – XML Format 2

Display System Information (Command Line Option -g)

S

NOTES:

„The <HBA>…</HBA> sequence repeats for each HBA.

„The <DriverSettings…/> sequence repeats for each HBA.

„The <VPD Product Identifier…/> sequence repeats for each HBA.

„The <Target>…</Target> sequence repeats for each target.

„The <LUN… /> sequence repeats for each LUN.

„The <EnabledLUN ID.… /> sequence repeats for each enabled LUN.

„The <TargetBinding…/> sequence repeats for each target persistent binding entry.

„The <BootDevice…/> sequence repeats for each boot device selection entry.

B.8.9

Link Statistics

(Command Line Option -ls)

The command format is:

scli -ls(<HBA Instance> <HBA WWPN>) [(<Parameter Name> <Parameter Alias>) <Parameter Value>] -x2

The XML Format 2 for the link statistics option is as follows:

<?xml version="value" encoding="value"?> <QLogic>

<AppName>SANsurfer FC HBA CLI</AppName> <AppVersion>vn.n.nn Build nn</AppVersion <AppXmlVersion>n.nn</AppXmlVersion>

<HBA>

<HBA Instance="value" HBAModel="value" HBAPort="value" WWNN="value" WWPN="value" />

<LinkStatus PortName="value" LinkFailure="value" SyncLoss="value" SignalLoss="value" InvalidCRC="value" TimeStamp="value"/>

</HBA>

<Status> n </Status> <Reboot> n /Reboot>

</QLogic>

The <HBA>…</HBA> sequence repeats for each HBA.

B-20 SN0054614-00 F