Q-Logic FC HBA CLI manual Display LUN Info, Display Link Status, To view the link status, type

5– Non-interactive Commands Command Summary

S

‰ Write buffer failed

„Link Failure – Number of link failures

„Loss of sync – Number of sync loss errors

„Loss of signal – Number of signal loss errors

„Invalid CRC – Number of invalid CRCs

5.3.19

-l

(Display LUN Info)

This command shows LUN information for:

„All HBAs

„A specific target

„A specific LUN on a specific target

To show the LUN information for all target devices for a specific HBA Instance, type:

#scli -l (<HBA Instance> <HBA WWPN>)

To show the LUN information for a specific device for a specific HBA port, type:

#scli -l (<HBA Instance> <HBA WWPN>) (<Target Port ID> <Target WWPN>)

To show the LUN information for a specific LUN on a specific target device for a specific HBA port instance, type:

#scli -l (<HBA Instance> <HBA WWPN>) (<Target Port ID> <Target WWPN>) <LUN ID>

Where:

HBA Instance = HBA number (use -g command to find)

HBA WWPN = World wide port name of the HBA

Target Port ID = Port ID of the target

Target WWPN = World wide port name of the target

LUN ID = ID of the LUN

5.3.20

-ls

(Display Link Status)

To view the link status, type:

#scli -ls(<HBA Instance> <HBA WWPN>) [(<Parameter Name> <Parameter Alias>) <Parameter Value>]

5-28 SN0054614-00 F