Q-Logic FC HBA CLI manual Save Configuration, Boot Devices All HBAs, Driver Settings Menu

4 – Interactive Commands

Driver Settings Menu (Command Line Option -fg)

S

4.8.1.2.3

Save Configuration

8: Boot Device n: Port Number 2: Config.Boot Device 2: Device Settings 1: LUN List 1: Save Configuration

When you select this option, the CLI shows the Save Configuration menu:

„Proceed

„Cancel

4.8.2

Boot Device(s) (All HBAs)

8: Boot Device 1: All HBAs

When you select this option, SANsurfer FC HBA CLI shows information about all boot devices for all HBAs. For details, see “Boot Device(s) (Per HBA Port)” on page 4-52.

„Product vendor

„Product ID

„Product revision

4.9

Driver Settings Menu

(Command Line Option -fg)

9: Driver Settings

When you select this option, SANsurfer FC HBA CLI shows the Driver Settings Menu that lists the ports on each HBA. Select the number corresponding to the port that you want, and then press ENTER to view the Target: Display Options and Target: Binding Options.

4-54 SN0054614-00 F