Q-Logic FC HBA CLI manual Revision D Changes

A

SANsurfer FC HBA CLI User’s Guide Command Line Interface for QLogic Fibre Channel Host Bus Adapters

Revision D Changes:

Operating systems supported:

Windows 2003 Server™ and Enterprise Server: added x64; removed IEM64T and AMD64. Added Windows® XP.

Red Hat™ Linux® AS: added x86_64; removed IEM64T and AMD64.

SuSE® Linux Enterprise Server (SLES) 8 and 9: added x86_64; removed IEM64T and AMD64. Removed Power PC (PPC) SLES 8 and 9. Solaris® SPARC®: removed v2.7; added version 7. Solaris: removed 9 x86 and 10 x86; added x86, v2.9, 10.

Removed the sentence “SANsurfer FC HBA CLI does not provide any features that require a GUI.”

Added QEM2462 and QLA/QLE2xx to list of sup- ported HBAs.

Changed standard (GUI) install instructions for Windows operating systems.

Changed package name version to xx, which indi- cates the current version of SANsurfer FC HBA CLI.

Changed step 1 of the Mac OX installation proce- dure. Removed the steps to create the root user, log out of the current user account, and log into the root user (previously steps 2, 3, 4).

Changed WWPN in example text to generic xx for consistency.

Changed name of Show System Information sub- menus.

Changed name of Boot Device to Boot Device Selection in interactive mode.

HBA Parameters (Table 4-2, Table 6-12):

Changed value of ResetDelay, ExecutionThrottle, and LinkDownTimeOut parameters. Added (QLA/QLE23xx HBAs) quantifier to EnableEx- tended Logging and EnableLIPFullLogin parame- ters.

Added a list of valid data patterns for the DataPat- tern diagnostic parameter (Table 4-4, Table 5-6).

All

Section 1

Section 1

3.1.1.1

3.1.1.2, 3.1.3.1, 3.12.3.3

3.1.4

Section 4

4.2.1, 4.2.2, 4.2.4, 4.2.5

4.10

4.6.1.2, Table 5-9

4.17.1.2.1, Table 5-6

SN0054614-00 F Page vii