A

4 – Interactive Commands Utilities Menu

4.10.3

HBA Parameters Update (Per HBA Port or All HBAs)

(Command Line Option -r)

10:Utilities 3: HBA Parameters Update

When you select HBA Parameters Update, you are prompted to select either one of your HBA port instances or All HBAs to update. SANsurfer FC HBA CLI then displays the following warning message:

Warning:

Please update the HBA parameters with extreme care.

Incorrectly updating the HBA parameters may render the HBA inoperable. If you currently have boot device information set up in the HBA parameters, updating the HBA parameters from a file may result in changing that information.

If you wish to preserve the boot device information, please either update the file with the correct boot device settings before the HBA parameters update or re-configure the boot settings after

the update.

Do you want to proceed with the operation?

1:Yes

2:No

Enter Selection:

If you select 1: Yes, you are prompted to enter the name of a file from which to update the HBA parameters.

4.10.4

HBA Parameters Save (Per HBA Port)

(Command Line Option -r and Reserved Word “save”)

10:Utilities 4: HBA Parameters Save

When you select the HBA Parameters Save option, SANsurfer FC HBA CLI prompts you to select an HBA. You then enter a file name to save the parameters for that HBA.

4.10.5

HBA Parameters Template (Per HBA or All HBAs)

(Command Line Option -n and OEM Name)

10:Utilities 5: HBA Parameters Template

SN0054614-00 F

4-57

Page 109
Image 109
Q-Logic FC HBA CLI manual HBA Parameters Update Per HBA Port or All HBAs, HBA Parameters Save Per HBA Port