Q-Logic FC HBA CLI Utilities Menu, Flash Update Per HBA Port or All HBAs, Flash Save Per HBA Port

4 – Interactive Commands Utilities Menu

S

Table 4-4. Driver Settings (Continued)

Parameter Name	Alias	Value	Description
<param name>	<param alias>	<param value>
BindPortID	BP	0,1	Bind devices by Port IDs.

a Driver Parameter NewOnly (NO) is supported only with the failover driver.

4.10

Utilities Menu

10: Utilities

When you select this option, SANsurfer FC HBA CLI shows the following utilities options:

„Flash Update

„Flash Save

„HBA Parameters Update

„HBA Parameters Save

„HBA Parameters Templates

„Driver Update (Windows only)

„Driver Rescan (Solaris with QLA driver only)

4.10.1

Flash Update (Per HBA Port or All HBAs)

(Command Line Option -b)

10:Utilities 1: Flash Update

When you select Flash Update, you are prompted to select either one of your HBA port instances or All HBAs to update. SANsurfer FC HBA CLI then provides the following update options and prompts you to enter a file name for the flash update file:

„Update Entire Image

„Update Boot Code Only

„Update FW Only

„Flash Update

4.10.2

Flash Save (Per HBA Port)

(Command Line Option -b and Reserved Word “save”)

10:Utilities 2: Flash Save

When you select this option, SANsurfer FC HBA CLI opens the Flash Save Menu, where you select an HBA port and then enter a file name to save.

4-56 SN0054614-00 F