Q-Logic FC HBA CLI manual Update HBA Parameters, Silent Mode, To update the HBA Parameters, type

5– Non-interactive Commands Command Summary

S

5.3.27

-r

(Update HBA Parameters)

To update the HBA Parameters, type:

#scli -r (<HBA Instance> <HBA WWPN> all) <File Name>

Where:

HBA Instance = HBA number (use -gcommand to find) HBA WWPN = World wide port name of the HBA

all = All HBA ports in the system are updated with the new HBA parameters

HBA Parameters File = File name or a path to a file that contains the updated HBA Name parameters

To save the HBA parameters to a file, type:

#scli -r (<HBA Instance> <HBA WWPN>) save <File Name>

Where:

HBA Instance = HBA number (use -gcommand to find) HBA WWPN = World wide port name of the HBA

HBA Parameters File = File name or a path to a file to save the HBA parameters Name

5.3.28

-s

(Silent Mode)

NOTES:

„The -soption is valid only in non-interactive mode.

„You can use this option with all non-interactive mode options that have a corresponding interactive mode option (see Table 5-1). This option must be the first or last command in the command line.

In non-interactive mode, the system shows result and status messages generated by SANsurfer FC HBA CLI (by default) unless suppressed by silent mode. You can combine this option with the -ooption (see section 5.3.23) so the output is saved in a file and does not appear on screen. For example:

# scli -I all -s -o output.txt

5-38 SN0054614-00 F