Q-Logic FC HBA CLI manual Following options and commands were changed in Rev. D

SANsurfer FC HBA CLI User’s Guide

Command Line Interface for QLogic Fibre Channel Host Bus Adapters

S

The following options and commands were changed in Rev. D:

Interactive mode commands: Changed instructions and the example text to new port sorting and num- bering scheme. No change to command function.

Non-interactive mode commands: Changed the HBA Port No. parameter to HBA No. parameter to support new port sorting and numbering scheme. No change to command function.

Display HBA Settings (-c)

DisplayHBA Information (-i) Display Device List (-t) Display LUN List (-l) Configure HBA Settings (-n) Target Persistent Binding (-p) Selective LUNs (-m)

Boot Device Selection (-e) Driver Settings (-fs)

View Driver Settings (-fg)

Save/Update Flash (-b)

Save/Update NVRAM (-r) Flash HBA Beacon (-a and -tb) Diagnostics (-kl and -kr) Statistics (-gs and -ls)

Host Information (-g):

Quantified that the direct driver version is only displayed in Windows. No longer shows firm- ware version. Shows new HBA number (HBA 0–n)

Display HBA Information (-I).

The following new general information shows:

HBA instance, HBA ID, OptionROM BIOS version, OptionROM FCode version, OptionROM EFI ver- sion, OptionROM firmware version, total number of devices.

The following general information has been removed: Device target count

The following VPD information has been removed: Asset tag End tag

4.3, 5.3.3 4.4, 5.3.1 5 4.5, 5 4.6, 5 4.7, 5 4.8, 5 4.9, 5 4.10, 5 4.11, 5 4.12, 5 4.12, 5 4.11, 5 4.16, 5 4.17, 5 4.18, 5

4.2.1, 4.2.4

4.4, 5.4.8

Page viii SN0054614-00 F