A

SANsurfer FC HBA CLI User’s Guide Command Line Interface for QLogic Fibre Channel Host Bus Adapters

Expanded Save/Update Flash section to list which OSs and HBAs save/update flash, BIOS, or the option ROM image.

Added description and preparation instructions for loopback and read/write buffer tests. Added description of these test results.

Section 4.10

Section 4.12.1.1, Section 4.12.2

The following options and commands were added in Rev. E:

Host Topology (command line option -tp)

HBA Alias (command line option -ha)

HBA Port Alias (command line option -pa)

SFF DMI (command line option -dm)

Section 4.1.2, Section 5.3.31

Section 4.2.1.2, Section 5.3.14

Section 4.2.1.3, Section 5.3.25

Section 4.12, Section 5.3.5

The following options and commands were changed in Rev. E:

Host Information (command line option -g): removed QLogic direct driver version from the list of displayed information.

For Host Configuration (command line option -z), made the following changes to the list of displayed information:

Added VPD information to display HBA information (command line option -I).

Added view driver settings (command line option -fg).

Removed run loopback test (command line option -kl).

Removed run read/write test (command line option -kr).

Removed display and change HBA statistics (com- mand line option -gs).

Removed display and change link status (com- mand line option -ls).

Also changed the list order to reflect the order in which the commands are displayed.

Show HBA Information (command line option -i):

Added HBA Alias and Port Alias to list of shown information.

Changed PCI bus number to PCI device number.

Show Device List (command line option -t): added Serial Number to the list of displayed information.

Section 4.2.1

Section 4.2

Section 4.2, Section 4.3.1

4.5, 4.4.1

SN0054614-00 F

Page v

Page 5
Image 5
Q-Logic FC HBA CLI manual Following options and commands were added in Rev. E