Q-Logic FC HBA CLI manual Set Rate, Log to File, Show HBA Statistics

A

4 – Interactive Commands Statistics Menu (Command Line Options -gs and -ls)

If you select the Manual Poll option, the system prompts you to enter a value for Manual Poll iteration:

Manual Poll iteration (1-256)

Enter a value from 1 to 256 and press ENTER. The system updates the Manual Poll iteration value and returns the following message:

Manual Poll updated.

4.13.1.1.4

Set Rate

13: Statistics 1: HBA Statistics 1: Configuration 4: Set Rate

The system prompts you to enter a value for the sampling rate (the current rate is shown in parentheses):

Sampling Rate Seconds [5-30](n):

Enter a value from 5 to 30 and press ENTER. The system updates the sampling rate and returns a message:

Sampling rate updated.

4.13.1.1.5

Log to File

13: Statistics 1: HBA Statistics 1: Configuration 5: Log To file

When you select the Log to File option, the system prompts you to enter a file name or press RETURN to cancel.

If you press the ENTER key, the HBA Statistics Settings Menu reappears.

If you enter a file name, for example, MyFile, the system saves the log to that file and returns a message:

Save to file option enabled (MyFile.csv).

The file name extension .csv indicates a Comma Separated Value file type.

4.13.1.2

Show HBA Statistics

13: Statistics 1: HBA Statistics 1: Show HBA Statistics

To view the HBA port statistics:

1.From the Main Menu, type the number for the Statistics option, and then press ENTER.

2.From the Statistics Menu, type the number for the HBA Statistics option, and then press ENTER.

SN0054614-00 F 4-79