Q-Logic FC HBA CLI manual Set Rate, Show Link Status

4 – Interactive Commands

Statistics Menu (Command Line Options -gs and -ls)

S

„ Auto Poll

„ Manual Poll

If you select the Auto Poll option, the system enables Auto Poll and returns a message:

Auto Poll enabled.

If you select the Manual Poll option, the system prompts you to enter a value for Manual Poll iteration:

Manual Poll iteration (1-256)

Enter a value from 1 to 256 and press ENTER. The system updates the Manual Poll iteration value and returns the following message:

Manual Poll updated.

4.13.2.1.4

Set Rate

13: Statistics 2: Link Status 1: Configuration 4: Set Rate

The system prompts you to enter a value for the sampling rate (the current rate is shown in parentheses):

Sampling Rate Seconds [5-30](n):

Enter a value from 5 to 30 and press ENTER. The system updates the sampling rate and returns a message:

Sampling rate updated.

4.13.2.1.5

Log to File

13: Statistics 2: Link Status 1: Configuration 5: Log to File

When you select the Log to File option, the system prompts you to enter a file name or press RETURN to cancel.

If you press the ENTER key, the Link Status Settings Menu reappears.

If you enter a file name, for example, MyFile, the system saves the log to that file and returns a message:

Save to file option enabled (MyFile.csv).

The file name extension .csv indicates a Comma Separated Value file type.

4.13.2.2

Show Link Status

13: Statistics 2: Link Status 2: Show Link Status

4-82 SN0054614-00 F