Q-Logic FC HBA CLI manual Target Link Speed All HBAs Basic Configuration

A

4 – Interactive Commands Target Link Speed or iiDMA Settings Menu (Command Line Option -q)

When you have set the speed for all the links you want, type the number for Apply changes to Selected Target(s) and then press ENTER.

4.5.4

Target Link Speed – All HBAs

5: Target Link Speed 2: All HBAs

When you select this option, the Target Link Speed Menu for All HBAs appears. It offers two options:

„Basic configuration

„Advanced Configuration

4.5.4.1

Target Link Speed – All HBAs – Basic Configuration

5: Target Link Speed 2: All HBAs 1: Basic Configuration

When you select this option, the Target Link Speed Menu (Basic) for All HBAs appears. It offers the link speed options. The options vary according to the HBA in use. For example:

„1 Gbps

„2 Gbps

„4Gbps

„8 Gbps

Respond Yes to the Proceed? prompt to apply the change to all Port Instances on all HBAs.

4.5.4.2

Target Link Speed – All HBAs – Advanced Configuration

5: Target Link Speed 2: All HBAs 1: Advanced Configuration

This option displays the Target Link Speed Menu (Advanced) for All HBAs. This menu lists all targets on all HBAs and shows information about each target:

„Target Type, Target number, HBA model, and Instance

‰Product vendor

‰Product ID

‰Product revision

‰Serial Number

‰Port Name

‰Port ID

‰Max Target Link Rate

„Next Target Type, Target number, HBA model and Instance

SN0054614-00 F 4-43