Q-Logic FC HBA CLI manual View Driver Settings, Display All Information for One or All HBAs

A – XML Format 1

XML Format 1 Tags for Each Option

S

</QLogic>

The <Target> sequence is repeated for each device attached to the adapter.

A.2.11

View Driver Settings

(Command Line Option -fg)

The XML Format 1 for the current driver settings information is as follows:

<?xml version="1.0" encoding="ISO-8859-1"?> <QLogic>

<AppName>SANsurfer FC HBA CLI</AppName> <AppVersion>vn.nn.nn Build nn</AppVersion>

<HBA>

<HBA Port="value" WWNN="value" WWPN="value" /> <DriverSettings>

<Info PersistentPlusNew="value" PersistentOnly="value" BindbyWWPN="value" BindbyPortID="value" />

/DriverSettings>

</HBA>

<Status> 0 </Status> <Reboot> 0 </Reboot>

</QLogic>

A.2.12

Display All Information for One or All HBAs

(Command Line Option -z)

The XML Format 1 for all adapter information is more complicated than its non-XML counterpart because the tags cannot be repeated. In non-XML mode, SANsurfer FC HBA CLI sequentially calls all the options in Table A-1, and each option is displayed in its standard output format. If each option displays its own XML output, the resulting display would have multiple duplicate tags.

Table A-1. Options Displayed by -z

Non-interactive	Description	Section
Option
-g	Display system information	4.1
-I	Display HBA information	4.2
-c	Display HBA settings	4.3
-t	Display device list	4.4
-L	Display LUN list	4.4

A-10 SN0054614-00 F