Q-Logic FC HBA CLI manual General Information

A

1 – Introduction Guide Overview

#scli -z

„Text in ALL CAPITALS usually indicates the name of a key that you press on the keyboard. For example:

Type the number for Host Information and then press ENTER.

„Italicized text indicates either a document reference, glossary term, or emphasis. For example:

Attached Port means a QLogic HBA....

For a complete list, see the QLogic SAN Interoperability Guide.

„Italicized text within angle brackets indicates user-defined variables. For example:

#scli -k (<HBA Instance> <HBA WWPN>)

„Text shown in blue indicates a cross-reference hyperlink to a Web site or to another section of this guide. Click the hyperlink to jump to that site or section. For example:

Visit the QLogic support Web site at support.qlogic.com for the latest firmware and product updates.

For information on Vital Product Data (VPD), see section 4.2.1.4.

„In Section 4 Interactive Commands, a “breadcrumbs” line follows most command headings to show you how to access that option; that is, it shows the hierarchical path from the top level to the command under discussion. For example, to reach the Save to Text File options from the main SANsurfer FC HBA CLI menu, you would select option 1 to open the General Information menu, 2 to open the Host Topology menu, and 2 again to see the Save to Text File options. The following shows a breadcrumbs example:

1: General Information 2: Host Topology 2: Save to Text File

SN0054614-00 F PRELIMINARY 1-3