JVC BD-X200U manual Others, Network Menu Screen, Troubleshooting

NETWORK MENU Screen
The following table identifies and describes the parameters that may be set using the NETWORK MENU screen.
Top half	:	Appearance on monitor screen
Bottom half	:	Appearance on LCD display
[ ]	:	Default setting

Parameter	Possible settings	Description
HOST NAME	bdx200	This parameter is used to enter the BD-X200’s network name using a keyboard.
		(Names may be up to 20 characters in length. Alphanumerical characters and hyphen
HOST		(-))
IP ADDRESS	[192.168.0.2]	This parameter is used to set the IP address. It is important to ensure that no two
		devices on a single network share the same IP address.
IP ADD
SUBNET MASK	[255.255.255.0]	This parameter is used to set the subnet mask. Connected BD-X200s should have
		the same network setting.
SUBNET
DEFAULT	[192.168.0.254]	This parameter is used to set the gateway address. Connected BD-X200s should
GATEWAY		have the same address.
GATE
MENU		This button is used to return to the Setup Menu screen.

Others

Troubleshooting

Before requesting for repair, please check the following URL: http://www.jvc-victor.co.jp/english/pro/prodv/ If problem persists, contact either the store where the BD-X200 was purchased or your nearest JVC authorized dealer.

85