Component Names & Functions

 

 

 

Rear Panel

 

 

 

 

 

 

2

1

3

4

5

 

 

 

VIDEO

 

AUDIO

 

 

IN

LINE OUT

INPUT

CH1

 

 

 

 

LEVEL

INOUT

 

 

 

 

 

4dB

 

 

 

 

 

8dB

 

 

IN

Y/C

 

6

 

 

 

 

 

CH2

 

 

DV IN/OUT

 

REMOTE

 

 

 

 

LAN

SIGNAL

 

 

USB

DC 19V

 

GND

 

 

 

 

 

 

 

 

 

 

 

7

 

 

$

LAN

SIGNAL

 

GND

9 #

VIDEO

 

AUDIO

 

IN LINE OUT

INPUT

 

CH1

 

LEVEL

IN

OUT

4dB 8dB

Y/C

IN

 

CH2

DV IN/OUT

REMOTE

8

 

 

USB

 

DC 19V

 

!

0@

1VIDEO LINE IN terminal (BNC) This terminal allows composite video signals to be input to the DVD recorder. In order to select these signals for input, set INPUT SELECT from the INPUT SELECT MENU screen to LINE.

SETUP from the SYSTEM MENU screen should be set in accordance with whether or not this input signal is a setup signal. (U-model only)

2VIDEO Y/C IN terminal (4-pin) This terminal allows YC separate video signals to be input to the DVD recorder. In order to select these signals for input, set INPUT SELECT from the INPUT SELECT MENU screen to Y/C.

SETUP from the SYSTEM MENU screen should be set in accordance with whether or not this input signal is a setup signal. (U-model only)

This terminal’s specification (i.e., S1 or S2) can be selected using Y/C TERMINAL MODE from the RECORDER MENU (2/2) screen.

3VIDEO LINE OUT terminal (BNC) This terminal is used to connect the DVD recorder to a monitor.

When the DVD recorder is in Stop or Recording mode, the video input signal is output on the E-E screen as a composite video signal.

If the REC button is pressed and held for at least 2 seconds while the DVD recorder is stopped, the input signal will be subjected to MPEG encode/decode processing and output via the VIDEO LINE OUT terminal. This will continue for as long as the REC button is held, and it allows the DVD recording quality to be confirmed.

Playback from the DVD is output as a composite signal when in Playback mode.

The Setup Menu, title menu, chapter menus, and other setting and control screens are displayed on the monitor connected to this terminal.

Status and alarm information is also displayed on-screen. (The DISPLAY MENU screen can be used to indicate which items are to be displayed.)

4AUDIO INPUT LEVEL switch

This switch is used to set the standard level for audio input.

+4dB

:

The standard level is set to +4 dB.

–8dB

:

The standard level is set to –8 dB.

5AUDIO IN terminals (RCA 2) These terminals allow analog audio signals to be input to the DVD recorder.

In order to select these signals for input, set INPUT SELECT from the INPUT SELECT MENU screen to LINE or Y/C.

6AUDIO OUT terminals (RCA 2) These terminals allow analog audio signals to be output from the DVD recorder.

When the DVD recorder is in Stop or Recording mode, the audio input signals (i.e., E-E signals) are output via these terminals.

Audio from the DVD is output when in Playback mode.

7DV IN/OUT terminal This I/O terminal for digital signals conforms with IEEE1394 specifications. As such, it allows the DVD recorder to be connected to DV cameras, DV VCRs, and non-linear editors with DV terminals.

In order to select this terminal’s audio and video signals for input, set INPUT SELECT from the INPUT SELECT MENU screen to DV.

REMOTE SELECT from the REMOTE MENU screen is used to select a control method for this terminal as follows. DV(MASTER) : The DVD recorder operates as the

 

 

master device and controls a DV camera

 

 

or VCR.

DV(SLAVE)

:

The DVD recorder operates as a slave

 

 

device and is controlled by commands

 

 

from a non-linear editor.

DV(TRIGGER)

:

The DVD recorder performs recording

 

 

in response to operation of the trigger

 

 

button on a camera capable of DV

 

 

triggering (i.e., a GY-DV5000).

8RS-422A REMOTE terminal (D-sub 9-pin male) This terminal is used to connect the DVD recorder to a VCR capable of being controlled via RS-422A.RS-422A control of a VCR using the RS-422A REMOTE terminal is carried out with the DVD recorder operating in Master mode. In order to use this terminal, set REMOTE SELECT from the REMOTE MENU screen to 9PIN(MASTER). Video and audio from the VCR can be recorded to a DVD using commands issued from the REMOTE CONTROL screen. (Page 59)

9LAN terminal (RJ-45)When two DVD recorders are used to perform DVD-to-DVD dubbing, this terminal is connected to both BD-X200s. A cable of Category 5 or better is required for this connection. A cross-type Ethernet cable is required when connecting directly to another BD-X200. This terminal is also used when connecting to a PC on which BD-X200 utility software for operations such as the creation of the title and chapter menus has been installed. Network settings must be carried out using the NETWORK MENU screen.

0USB terminals (2) These terminals are used when connecting the DVD recorder to USB devices such as a keyboard or mouse. A keyboard and mouse can be used as an alternative to the DVD recorder’s buttons when using setting and control screens. The input of text in setting screens is carried out using a keyboard.

It is not be possible to operate devices other than a keyboard or mouse by connecting them to the USB terminal.

Set KEYBOARD STYLE from the SYSTEM MENU screen

in accordance with the keyboard’s input language. Recommended manufacturers: Logitech

!DC IN terminal (2-pin)This terminal is used to provide DC at 19 V to the DVD recorder. The DC power cord from the AC adaptor (included) should be connected here.

Note When power is supplied via this terminal, the OPERATE indicator on the front panel lights up in red.

@DC power cord clamp This clamp secures the DC power cord in place, and it should always be used to prevent accidental disconnection.

#SIGNAL GND terminal This terminal is used to ground signals.

$Optional-board slot cover This cover is removed to allow commercially-available optional boards to be installed.

12

13

Page 9
Image 9
JVC BD-X200U manual Rear Panel, 4AUDIO Input Level switch, Dvslave

BD-X200U specifications

The JVC BD-X200U is a professional-grade Blu-ray player that represents a significant advancement in the realm of high-definition multimedia playback. Designed for a variety of applications, including commercial settings, educational institutions, and home theaters, the BD-X200U delivers exceptional performance in video and audio quality, making it an ideal choice for anyone seeking a robust multimedia solution.

One of the standout features of the BD-X200U is its support for a wide range of disc formats. This device is capable of playing Blu-ray Discs, DVDs, and CDs, providing users with versatile playback options. The player also supports the BDXL format, which allows for the use of triple-layer Blu-ray discs, enabling storage capacities of up to 128 GB. This is particularly beneficial for users looking to store large amounts of data or high-definition video content without the need to frequently change discs.

Equipped with JVC's advanced image processing technology, the BD-X200U ensures that video playback is not only smooth but also exhibits outstanding clarity and color accuracy. The player supports 4K upscaling, enhancing standard and Blu-ray content to near-4K quality, which means users can experience improved resolution and detail on compatible displays. Additionally, the player incorporates HDR (High Dynamic Range) technology, allowing for a broader range of colors and improved contrast between light and dark elements in videos.

Audio quality is another focal point of the BD-X200U, as it supports various high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio. This enables users to enjoy an immersive audio experience that complements the stunning visual prowess of the player. The unit also features balanced XLR outputs, which are essential for professional audio setups, ensuring low noise and high-quality sound transmission.

Networking capabilities are also part of the BD-X200U's feature set. The player includes HDMI inputs and outputs, as well as USB ports, allowing for easy connection to a variety of devices. It supports streaming services, giving users access to online content directly from the player. Furthermore, the BD-X200U can integrate with control systems, making it suitable for complex setups.

In summary, the JVC BD-X200U is a versatile and high-performance Blu-ray player that serves as a powerful tool for both professionals and home entertainment enthusiasts. Its diverse format support, superior image and audio quality, and advanced connectivity options position it as a leading choice in the market for high-definition multimedia playback.