Introduction

Precautions for Disc Usage

Care of Discs to Ensure High-Quality Playback

Details Regarding Discs

 

Discs for Recording & Playback

Finalizing

Fingerprints, dust, or any other similar contamination of the surface of a disc can lead to distortion in the playback of recorded video and audio. For this reason, it is good practice to wipe each disc with a soft cloth before use.

 Looking After Discs

 Handling Discs

 

Using a soft cloth, wipe the disc gently from the inside to

Removing a disc

Placing a disc in its case

the outside.

 

 

The following shows the discs that can be recorded to and played

using this DVD recorder, in addition to the corresponding display

marks or logos.

 

DVD-R

12 cm: 4.7 GB

 

General Version 2.0

 

(video mode)

When a DVD-R or a DVD-RW (video mode) has been finalized, it can be played in the same way as any other DVD using a standard DVD player. (Page 42)

 Recording to unused sections of a disc and the modification of titles or display styles can be carried out as required before a disc is finalized.

If stubborn dirt is present on the surface of a disc, wipe first using a slightly wet cloth and then using a dry cloth.

Paint thinners, organic solvents, analog record cleaning agents, anti-static sprays, and the like must never be used. Failure to observe this precaution can lead to discs being permanently damaged.

Correct method for holding a disc

Your hands or fingers should not come into contact with the recording surface when holding a disc.

DVD-RW

12 cm: 4.7 GB

 

Version 1.1 or later

 

(video mode)

*Certain characteristics and properties of DVD-Rs and DVD- RWs can render them unsuitable for recording or playback.

Recommended manufacturers

DVD-R

:

JVC, Maxell, TDK 1, 2, 4

DVD-RW :

JVC, TDK 1, 2

In the case of both DVD-Rs and DVD-RWs, it is impossible to overwrite previously recorded content with new data, even if the disc in question has not yet been finalized. The deletion of specific sections of data is also impossible.

Regardless of whether or not finalization has been carried out, it will not be possible to use this DVD recorder to record new content to a DVD-R or DVD-RW that has been recorded using other devices.

Once a disc has been finalized, it can be used as a standard DVD and its recorded audio and video can be played on this and other DVD players.

Additional Notes on Disc Handling

Storing Discs

After finalizing, a disc’s titles can be selected from the top

 

menu.

Never wipe a disc using paint thinners, organic solvents, alcohol, or record-cleaning fluid. Do not use disc protectors or scratch guards.

Stickers and other types of paper label should not be applied. Do not use discs from which stickers or labels have been

removed.

Do not use discs on which illustrations or text has been printed using a commercially-available label printer. First create a disc using the unit before printing.

The use of non-circular discs (i.e., heart or rectangular shaped), warped discs, and cracked discs can lead to breakage of the DVD recorder.

Avoid storing discs in any of the following locations.

Areas with high levels of humidity or dust, or areas where mold is present.

Areas exposed to direct sunlight or close to heating equipment.

Vehicle interiors during summer months.

Take care to avoid dropping or knocking discs.

Place discs in cases and stack these cases for storage.

Discs can be deformed or cracked as a result of stacking, leaning, or dropping when not inside a case.

DVD-R & DVD-RW Details

DVD-R

:

Only discs that conform with DVD-R Standard 2.0

 

 

(video mode) can be used.

DVD-RW :

Discs of Version 1.1 or later can be used.

 

 

Although Version 1.1 of the DVD-RW Standards

 

 

allows the selection of either video mode or VR mode

 

 

for recording, this DVD recorder performs recording

 

 

in video mode only.

*Version 1.0 of the DVD-RW Standards does not support video-mode recording, and for this

reason, the corresponding discs cannot be used. In terms of recording characteristics, DVD-R and DVD-RW (video mode) differ as follows.

 DVD-R

Each disc can be recorded only one. Accordingly, these

 

discs are recommended for use in archiving or long-term

 

storage.

Once a disc has been finalized, it can also be played on

 

other DVD players.

 DVD-RW (video mode):

After viewing a disc, all data can be erased and it can be

 

used to record new content.

Once a disc has been finalized, it can also be played on

 

other DVD players.

Additional recording will not be possible after finalizing.

Although a finalized disc may in principle be played on

 

other DVD players, certain characteristics of the disc and

 

its recording conditions may make this impossible.

Playing Discs on the BD-X200

The BD-X200 is capable of playing any discs that it has created

and finalized.

The following conditions may occur when attempting to

play discs recorded using other devices on this DVD

recorder.

Inability to play

Block-type noise (i.e., mosaic)

Interruptions in audio and/or video

Unintentional stopping during playback

Commercially-available DVD-Videos and DVD-ROMs

cannot be used.

6

7

Page 6
Image 6
JVC BD-X200U manual Introduction, Precautions for Disc Usage, Details Regarding Discs

BD-X200U specifications

The JVC BD-X200U is a professional-grade Blu-ray player that represents a significant advancement in the realm of high-definition multimedia playback. Designed for a variety of applications, including commercial settings, educational institutions, and home theaters, the BD-X200U delivers exceptional performance in video and audio quality, making it an ideal choice for anyone seeking a robust multimedia solution.

One of the standout features of the BD-X200U is its support for a wide range of disc formats. This device is capable of playing Blu-ray Discs, DVDs, and CDs, providing users with versatile playback options. The player also supports the BDXL format, which allows for the use of triple-layer Blu-ray discs, enabling storage capacities of up to 128 GB. This is particularly beneficial for users looking to store large amounts of data or high-definition video content without the need to frequently change discs.

Equipped with JVC's advanced image processing technology, the BD-X200U ensures that video playback is not only smooth but also exhibits outstanding clarity and color accuracy. The player supports 4K upscaling, enhancing standard and Blu-ray content to near-4K quality, which means users can experience improved resolution and detail on compatible displays. Additionally, the player incorporates HDR (High Dynamic Range) technology, allowing for a broader range of colors and improved contrast between light and dark elements in videos.

Audio quality is another focal point of the BD-X200U, as it supports various high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio. This enables users to enjoy an immersive audio experience that complements the stunning visual prowess of the player. The unit also features balanced XLR outputs, which are essential for professional audio setups, ensuring low noise and high-quality sound transmission.

Networking capabilities are also part of the BD-X200U's feature set. The player includes HDMI inputs and outputs, as well as USB ports, allowing for easy connection to a variety of devices. It supports streaming services, giving users access to online content directly from the player. Furthermore, the BD-X200U can integrate with control systems, making it suitable for complex setups.

In summary, the JVC BD-X200U is a versatile and high-performance Blu-ray player that serves as a powerful tool for both professionals and home entertainment enthusiasts. Its diverse format support, superior image and audio quality, and advanced connectivity options position it as a leading choice in the market for high-definition multimedia playback.