Q-Logic FC HBA CLI manual

A

SANsurfer FC HBA CLI User’s Guide Command Line Interface for QLogic Fibre Channel Host Bus Adapters

Display LUN List (-l):

In interactive mode, added target type to infor- mation displayed.

Removed asset tag and end tag from list of VPD information.

In example text, changed the first two option names of the Selective LUN(s) Display Configura- tion menu.

In example text, changed the first two option names of the Selective LUN(s) Configuration - HBA/Device menu.

Boot Device Selection (-eE): In interactive mode, added new HBA Boot Device menu to example text.

Target Persistent Binding (-p):

In interactive mode, changed first two option names of Target Persistent Binding menu in the example text.

Driver Settings (-fs): Changed from bind By WWPN to bind by Port ID.

Save/Update Flash (-b):

In interactive mode, removed secondary subti- tles of Option ROM Update menu in the example text.

In non-interactive mode, added new all parameter following the boot parameter.

Save/Update NVRAM (-r): In interactive mode, removed the secondary subtitles of the NVRAM Update Menu in the example text.

4.6

4.10, 5.3.6

4.8, 5.9

4.11

4.12, 5.3.2

4.11

SN0054614-00 F Page ix