Q-Logic FC HBA CLI Help, HBA Statistics Parameters, Type the following text to view the help file

A

5– Non-interactive Commands Command Summary

Where:

HBA Instance = HBA number (use -gcommand to find)

HBA WWPN = World wide port name of the HBA

Parameter Name = Name of the parameter (see table 4-7)

Parameter Alias = Alias of the parameter (see table 4-7)

Parameter Value = New value of the parameter (see table 4-7)

Table 5-4lists the HBA statistics parameter names, aliases, and values.

Table 5-4. HBA Statistics Parameters

Description	Name	Alias	Value
Sets how often statistics are	AutoPoll	AP	0–256a
retrieved
Set the polling interval when	PollRate	SR	5–30
retrieving statistics (seconds)
Saves the HBA’s statistics to	LogToFile	LF	Log file name
a CVS log file
Table Notes

When the AutoPoll parameter is 0, statistics are retrieved automatically until the user aborts the operation. When the AutoPoll parameter is in the range of 1–256, statistics are retrieved for the number of cycles specified by this value.

Under Solaris, this feature is disabled if you are using the driver from the OS installation CDs (QLC driver). Under Linux, this feature is disabled if you are using the ioctl or sysfs (inbox) driver.

5.3.13

-h

(Help)

Type the following text to view the help file:

#scli (-h ?)

Type the following text to view help information for an individual command:

#scli <Command Line Parameter> (-h ?)

For example, typing scli -l-hshows:

SANsurfer FC HBA CLI v1.x.x Build x

Copyright 2003-2007 QLogic Corp. All rights reserved.

SN0054614-00 F 5-15