Q-Logic FC HBA CLI manual Errorflashupdatenoregion

A

C – Interactive Exit Codes

Table C-1. Exit Code Descriptions – Interactive Mode (Continued)

Return	Name	Description
Code
37	ERROR_FLASH_UPDATE_NO_REGION_	HBA does not have flash update region lay-
	LAYOUT	out
38	Reserved	Not used
39	Reserved	Not used
40	ERROR_DIAGNOSTICS_PARAM_ERROR	Diagnostics test returns invalid parameters
41	ERROR_DIAGNOSTICS_LOOP_DOWN	Unable to run diagnostics because the loop is
		down
42	ERROR_DIAGNOSTICS_FAILURE	Diagnostics test failed with errors
43	ERROR_DIAGNOSTICS_DATA_ MISCOM-	Diagnostics test failed with data miscompare
	PARE
44	ERROR_DIAGNOSTICS_UNKNOWN_	Unknown diagnostics test status
	STATUS
45	ERROR_DIAGNOSTICS_NO_AVAIL_	Unable to run R/W buffer test because there
	TARGET	are no attached devices
46	ERROR_DIAGNOSTICS_NOT_FOUND_	Unable to run R/W buffer test because the
	TARGET	excluded device is not available
47	ERROR_DIAGNOSTICS_MAX_FRAME_	Unable to run diagnostics because of the
	SETTING	HBA current frame size setting
48	ERROR_INVALID_DIAGNOSTICS_	Invalid diagnostics test parameter settings
	SETTINGS
49	Reserved	Not used
50	ERROR_FC_LINK_UNKNOWN_STATUS	Error getting FC link status
51	ERROR_RESET_LINK_STATUS	Unable to reset HBA link status
52	ERROR_INVALIDE_STATISTICS_PARAMS	Invalid link status/statistics parameter set-
		tings
53	Reserved	Not used
54	Reserved	Not used
55	Reserved	Not used
56	Reserved	Not used
57	Reserved	Not used

SN0054614-00 F C-3