Q-Logic FC HBA CLI Target Persistent Bindings Per HBA Port, Display Target Persistent Binding

4 – Interactive Commands

Target Persistent Bindings Menu (Command Line Option -p)

S

When you select this option, SANsurfer FC HBA CLI shows the Target Persistent Binding menu listing standard HBA port instances (see 4.5.2), where you can select an individual HBA port or All HBAs.

The following sections describe how to view, set, and delete the HBA’s target persistent binding in interactive and non-interactive modes.

NOTES:

„In a Solaris OS, QLA/QLE24xx and QEM2462 HBAs with a QLA driver allow up to 2048 targets with target IDs in the range of 0–2047.

„In a Solaris OS, QLA/QLE23xx HBAs with a QLA driver allow up to 256 targets with target IDs in the range of 0–2047.

„Under Solaris, this feature is disabled if you are using the driver from the OS installation CDs (QLC driver). Under Linux, this feature is disabled if you are using the ioctl or sysfs (inbox) driver.

Whether you select a particular HBA Port Instance or All HBAs, the Target Persistent Bindings Menu appears.

4.6.1

Target Persistent Bindings (Per HBA Port)

(Command Line Option -p)

6:Target Persistent Bindings 1 - n: Target Persistent Bindings HBA Instance n

When you select an HBA Instance to view or change its binding, this menu the Target Persistent Bindings Menu for a particular HBA instance appears. It shows the binding options you can choose from:

„Display Configuration

„Bind Target(s)

„Unbind Target(s)

Type the number for the option you want and press ENTER.

4.6.1.1

Display Target Persistent Binding

(Command Line Option -p)

6: Target Persistent Binding 1 - n: Target Persistent Binding HBA Instance n 1: Display Configuration

When you select the Display Configuration option, the following information appears. (Or, the message, No target persistent binding configuration on HBA instance n appears instead):

„Bind status (Yes)

„Device type (Disk, for example)

4-46 SN0054614-00 F