Q-Logic FC HBA CLI manual 11lists the HBA parameter names and aliases, HBA Parameters

5– Non-interactive Commands Command Summary

S

Table 5-11lists the HBA parameter names and aliases.

Table 5.-11. HBA Parameters

Description	Name	Alias	Value
Connection options	ConnectionOption	CO	See table note, belowa
Data rate	DataRate	DR	See table note, belowb
Enable BIOS	EnableBIOSc	EB	1=Enable, 0=Disable
Enable extended logging	EnableExtendedLog-	EL	1=Enable, 0=Disable
	gingd
Enable FC tape	EnableFCTape	EF	1=Enable, 0=Disable
Enable hard loop ID	EnableHardLoopID	HL	1=Enable, 0=Disable
Enable LIP full login	EnableLIPFullLogin	FL	1=Enable, 0=Disable
Enable LIP reset	EnableLipReset	LP	1=Enable, 0=Disable
Enable target reset	EnableTargetReset	TR	1=Enable, 0=Disable
Execution throttle	ExecutionThrottle	ET	1–65535
Frame size	FrameSize	FR	512, 1024, 2048
Hard loop ID	HardLoopID	HD	0–125
Interrupt delay timer	InterruptDelay-	ID	0–255
	Timer
Login retry count	LoginRetryCount	LR	0–255
Link down timeout	LinkDownTimeOut	LT	0–240
Maximum LUNs per tar-	MaximumLUNsPerTar-	ML	0, 8, 16, 32, 64, 128,
get	get		256
Operation mode	OperationMode	OM	See table note, belowe
Port down retry count	PortDownRetryCount	PD	0–255
Reset Delay	ResetDelay	RD	0-255

Table Notes:

aConnection Options: 0 – Loop only

1 – Point-to-point only

2 – Loop preferred, otherwise point-to-point

3 – Point-to-point preferred, otherwise loop (QLA22xx HBAs only)

5-32 SN0054614-00 F