Q-Logic FC HBA CLI Starting Non-interactive Mode, Following inputs are valid for the port ID

A

2 – Getting Started Starting Non-interactive Mode

2.3

Starting Non-interactive Mode

To start SANsurfer FC HBA CLI in non-interactive mode, type the following in a command window:

scli <Parameters>

SANsurfer FC HBA CLI executes the command options, then terminates.

To list all of the available command line parameters and the SANsurfer FC HBA CLI version, type the following:

scli -h

– Or –

scli -?

In Solaris SPARC, include double quotes around the view option (?) if the system is running with a csh or tsch shell. For example:

#scli -e 0 "?"

For world wide node name (WWNN), world wide port name (WWPN), and port ID parameter inputs, SANsurfer FC HBA CLI accepts the notation with and without the dash (–). Hexadecimal values can be uppercase or lowercase.

The following input formats are valid for the WWNN and WWPN:

20-00-00-E0-8B-01-83-C4 200000E08B0183C4

The following inputs are valid for the port ID:

68-5C-AB 685CAB

All command line options must be preceded by the dash (–) or forward slash (/) notation. Most options have a corresponding menu selection in interactive mode. The valid command line options are listed in Table 2-1.

SN0054614-00 F PRELIMINARY 2-3