2 – Getting Started Starting Interactive Mode

S

3.Run SCLI commands as required.

4.When finished, return to the main menu, and type the indicated number to quit SANsurfer FC HBA CLI.

5.Close the terminal window.

The Main Menu appears as shown in the following:

SANsurfer FC HBA CLI v1.x.x Build xx

Main Menu

1:General Information

2:HBA Information

3:HBA Parameters

4:Target/LUN List

5: Target Link Speed

or 5: iiDMA Settings

6:Target Persistent Bindings

7:Selective LUNs

8:Boot Device

9:Driver Settings

10:Utilities

11:Beacon

12:Diagnostics

13:Statistics

14: Help

or

14: Virtual (if available)

15: Exit

or

15: Help

 

or

16: Exit

NOTE:

The Virtual menu is available only on Windows systems running with a driver that supports NPIV (N_Port ID Virtualization).

Depending on which menu you select, may prompt you for more input. For example, if you select HBA Parameters, SANsurfer FC HBA CLI prompts you for the port number that corresponds to the HBA model you want to view.

NOTES:

„The Driver Update option under Utilities (option 10) is only available on Windows.

„In Solaris SPARC, the option to Save/Update BIOS is Save/Update FCode.

2-2

PRELIMINARY

SN0054614-00 F

Page 31 Page 33
Page 32
Image 32
Q-Logic FC HBA CLI manual Virtual if available
Page 31 Page 33
Top Page Image Contents