Q-Logic FC HBA CLI manual Target portid target id Hba instance hba wwpn

E – Help Commands

S

Table E-1. Help Commands (Continued)

Command	Arguments	Function
Line
Action
–p	( <hba instance> <hba wwpn> )	Binds the selected device(s) attached to an
	{ <target wwnn> <target wwpn>	HBA port.
	<target portid> <target id> }
–p	( <hba instance> <hba wwpn> )	Unbinds a specific device attached to an HBA
	remove <target wwnn> unbind	port.
	<target wwnn>
–p	( <hba instance> <hba wwpn>	Displays the current persistent binding config-
	<all> ) ( view ? )	uration on an HBA port or all HBAs.
–p	( <hba instance> <hba wwpn>	Binds all device(s) attached to an HBA port or
	<all> ) bind all	all HBAs.
–p	( <hba instance> <hba wwpn>	Unbinds all device(s) attached to an HBA port
	<all> ) remove all unbind all	or all HBAs.
–pa	( <hba instance> <hba wwpn> )	Sets an alias to an HBA port.
	<alias>
–pa	( <hba instance> <hba wwpn> )	Deletes the current alias of an HBA port.
	delete
–pa	( <hba instance> <hba wwpn> )	Displays the current alias of an HBA port.
	view ?
–q	( <hba instance> <hba wwpn> )	Modifies the iiDMA settings of selected tar-
	{ <target wwpn> <speed> }	get(s) on an HBA port. This feature is sup-
		ported only on 4Gb or latest HBAs.
–q	( <hba instance> <hba wwpn> )	Displays the current iiDMA settings of a spe-
	<target wwpn>	cific target on an HBA port.
–q	( <hba instance> <hba wwpn>	Modifies the iiDMA settings of all targets on an
	<all> ) ( –targets –t )	HBA port or all HBAs.
	<speed>
–q	( <hba instance> <hba wwpn>	Displays the current iiDMA settings of all tar-
	<all> ) [ –targets –t ]	gets on an HBA port or all HBAs.
–r	( <hba instance> <hba wwpn> )	Saves the current HBA parameters of an HBA
	save <file name>	port to a file.
–r	( <hba instance> <hba wwpn>	Updates the HBA parameters of an HBA port
	<all> ) <file name>	or all HBAs from a file.

E-6 SN0054614-00 F