Q-Logic FC HBA CLI manual To see the interactive exit codes, see Appendix C, Code Name Description

Appendix D

Non-interactive Error Codes

To list the SANsurfer FC HBA CLI non-interactive error codes from the command line, type:

scli -ei

(To see the interactive exit codes, see Appendix C.)

Table D-1. Error Code Descriptions – Non-interactive Mode

Code	Name	Description
0	SUCCESS	Command executed with no error
1	ERROR_OPEN_FlLE	Failed to open file
2	ERROR_READ_FILE	Failed to read file
3	ERROR_WRITE_FILE	Failed to write to a file
4	ERROR_CLOSE_FILE	Failed to close a file
5	ERROR_INCORRECT_FILE	Selected file is incorrect
6	ERROR_INCORRECT_FILE_SIZE	File size is incorrect
7	ERROR_UNSUPPORTED_HBA	HBA is unsupported
8	ERROR_NO_HBA	Unable to open the HBA handle
9	ERROR_UNKNOWN_HBA	HBA is unknown to SANsurfer FC
		HBA CLI
10	ERROR_INVALID_SSID	HBA has invalid SSDID/SSVID
11	ERROR_MISMATCH_SSID	The specified flash/NVRAM file does
		not have the SSDID/SSVID that match
		HBA
12	ERROR_MISMATCH_CHECKSUM	File checksum does not match
13	ERROR_CORRUPTED_FILE	File appears to be corrupted
14	ERROR_FILE_CHKSUM_ERROR	File checksum returns error
15	ERROR_FILE_INVALID_DATA	File has invalid data
16	ERROR_FLASH_UPDATE_IGNORE	HBA does not need to be updated
17	Reserved	Not used

SN0054614-00 F D-1