Q-Logic FC HBA CLI manual Command Arguments Function, All file name

E – Help Commands

S

Table E-1. Help Commands (Continued)

Command	Arguments	Function
Line
Action
–b	( <all> <hba instance> <hba	Updates the HBA boot code from a file, where:
	wwpn> ) [ ( <–rg> <fw boot	„ <–rg>Specifies Option ROM region
	all> ) ] <file name>	update mode.
		„ <all> Updates the flash from a full image
		file (1MB image file).
		„ <fw> Updates the firmware image only
		from a firmware file.
		„ <boot> Updates the boot code
		(BIOS/Fcode/EFI) image only from a boot
		code file.
		„ <file name> Flash image file name.
		Note: Region update is not available on 2Gb
		HBAs. Flash update is not supported on 2Gb
		HBAs in Macintosh. If selected multiple HBAs,
		only HBAs that are compatible with the pro-
		vided flash image will be updated.
–b	( <hba instance> <hba wwpn> )	Saves the HBA boot code to a file.
	save <file name>
–c	( <hba instance> <hba wwpn> )	Views the HBA Parameters settings of an HBA
		port.
–c	[ <all> ]	Views the HBA Parameters settings of all
		HBAs.
–d	<file name >	Performs a driver update to the HBAs. <file
		name> is the full path of the driver file in
		inf/zip or exe format.
–dm	( <hba instance> <hba wwpn>	Runs a transceiver (SFF/SFP) diagnostics on
	<all> ) general gen details	an HBA port and displays the result in general
	det	or detail view. This feature is supported only
		with 4Gb HBA or latest. This feature is not
		available with inbox driver (SLES 10.0 / RHEL
		5.0 or latest).
–e	( <hba instance> <hba wwpn> )	Selectable Boot: Configure the operating sys-
	( enable 0 0 0 )	tem to boot from the first target the BIOS finds.
–e	( <hba instance> <hba wwpn> )	Selectable Boot: Configure the operating sys-
	( enable 0 0 0 )	tem to boot from the first target the BIOS finds.

E-2 SN0054614-00 F