Q-Logic FC HBA CLI Table B-1. Options Displayed by -z, Non-interactive Setting Section Option

A

B – XML Format 2 Display System Information (Command Line Option -g)

DeviceID= "value" PortID= "value" LunCount= "value" Type= "value" DeviceStatus= "value" />

</Target>

</HBA>

<Status> n </Status> <Reboot> n /Reboot>

</QLogic>

The <Target>…</Target> sequence repeats for each target.

The <HBA>…</HBA> sequence repeats for each HBA.

B.8.8

Display All Information for One or All HBAs

(Command Line Option -z)

The XML Format 2 for all adapter information is more complicated than its non-XML counterpart because the tags cannot be repeated. In non-XML mode, SANsurfer FC HBA CLI sequentially calls all the options in Table B-1, and each option is displayed in its standard output format. If each option displays its own XML2 output, the resulting display would have multiple duplicate tags.

Table B-1. Options Displayed by -z

Non-interactive	Setting	Section
Option
-g	Display system information	5.3.11
-c	Display HBA settings	5.3.3
-I	Display HBA information	5.3.19
-t	Display device list	5.3.29<
-L	Display LUN list	5.3.19
-P	Target persistent binding	5.3.24
-m	Selective LUNs	5.3.21
-E	Boot device	5.3.6

The command format is:

scli -z (<HBA Instance> <HBA WWPN> all) -x2

The XML Format 2 for all adapter information is as follows:

<?xml version="value" encoding="value"?>

SN0054614-00 F B-17