Q-Logic FC HBA CLI manual Transceiver Details Details

A

4 – Interactive Commands Diagnostics Menu (Command Line Options -kl, -kr, and -dm)

	Temperature	Voltage	Tx Bias	Tx Power	Rx Power
	(C)	(V)	(mA)	(mW)	(mW)
Value	--------------	-------	-------	--------	--------
	34.17	3.33	5.86	0.498	1.174
Status	Normal	Normal	Normal	Normal	Normal
High Alarm	95.00	3.63	9.00	0.676	4.000
High Warning	85.00	3.56	8.50	0.646	2.832
Low Warning	-5.00	3.04	2.00	0.186	0.200
Low Alarm	-10.00	2.97	2.00	0.100	0.100

4.12.3.2

Transceiver Details – Details

Select the Details option on the Transceiver Details menu to view detailed information for the selected HBA port. The following shows an example:

------------------------------------------------------------------------------

HBA Instance 4: QLE2562 Port 2 WWPN 21-01-00-1B-32-36-18-EE PortID 01-0F-00

------------------------------------------------------------------------------

Optical Transceiver Digital Diagnostic Data:

Address A0

Identifier: SFP

Ext. Identifier: GBIC/SFP defined by serial ID only

Connector: LC
Transceiver Data	0x00	0x00 0x00 0x00
Compliance:
FC Link Length:	Intermediate Distance (I)
FC Transmitter Tech:	Shortwave Laser w/o OFC (SN)
FC Transmission Media:	Multi-mode 50m (M5), Multi-mode 62.5m (M6)
FC Speed:	200 MBytes/Sec, 400 MBytes/Sec, 800 MBytes/Sec
Encoding:	8B10B
BR, Nominal:	0x55
Length (9um) - km:	0x00
Length (9um):	0x00
Length (50um):	0x05
Length (62.5um):	0x02
Length (Copper):	0x00
Vendor name:	Intel Corp.
Vendor OUI:	0x00	0x02 0xb3
Vendor PN: TXN31118D100000
Vendor Rev:	0x0352
Wave Length:

CC_BASE: 0xc1

Options:-Signal Loss, as defined in SFP MSA: 0x1 -Signal Loss, inverted from SFP MSA: 0x0 -TX_FAULT signal implemented: 0x1

-TX_DISABLE implemented & disables serial o/p: 0x1

-RATE_SELECT implemented: 0x1

SN0054614-00 F 4-73