Hitachi P55T551, P42T501 How to Use the SOURCE SELECT Button, The Remote Control, Input Access

The Remote Control

How to Use the SOURCE SELECT Button

INPUT ACCESS
This optional feature allows the user of the remote
control to setup it’s SOURCE SELECT button to access	, ,
the specified input of the TV. Setup for this feature is
	, ,
applicable to the remote control’s normal mode only and
only applies to the DVD, PVR/VCR and SAT/CBL
modes.

1.Select the desired device mode (DVD, PVR/VCR,

SAT/CBL) by using your SOURCE SELECT button to position the LED indicator to the corresponding

selection.

2. Hold down the SOURCE SELECT button on the remote and enter the four digit preset code that matches your device as shown on pages 37-38.

3.Then enter the assigned input number (1-7) that the

device is related to (refer below to Table 1).

4.Release the SOURCE SELECT button.

5. If done correctly, the device LED indicator will blink 3 times to confirm proper setup.

6.The remote will now control the desired device.

7.Pressing the INPUTS button will now access the video input of the desired device.

SETUP EXAMPLE (Hitachi DVD with precode 0573 connected to INPUT 1 of the TV)

Select DVD mode by using your SOURCE SELECT button to position the LED indicator to DVD.

Hold down the SOURCE SELECT button and press the numbers 0, 5, 7 and 3.

Then press the number 1 for the assigned input number of the DVD player.

Release SOURCE SELECT button.

	Table 1
INPUT		ASSIGNMENT NUMBER
INPUT 1		1
INPUT 2		2
INPUT 3		3
INPUT- FRONT		4
HDMI 1		5
HDMI 2		6
HDMI- FRONT		7

	NOTE: 1.	This feature is optional
If done correctly, the device LED indicator will blink	2.	Assigned input numbers can be used more
3 times to confirm proper setup.		than once if applicable.
The remote will now control the DVD player.
Press the INPUTS button to instantly access the
video input of your DVD on Input 1.

36