Hitachi P42T501 How To Set Up Your New Hitachi Plasma Television, First time use, Antenna

Models: P50T501A P50T501 P55T551 P42T501 P42T501, P42T501A, P50T501, P50T501A, P55T551

1 87
Download 87 pages 21.55 Kb
Page 5
Image 5
How To Set Up Your New Hitachi Plasma Television

How To Set Up Your New Hitachi Plasma Television

To take measures to prevent the Plasma Television from tipping over and prevent possible injury it is important to mount the unit in a stable and flat surface.

Securing to a table-top

1.Using wood screws (two) fasten the set to the

clamping screw holes on the rear of the Plasma

TV stand as shown below.

2.Using commercially available wood screws, secure the set firmly in position.

Securing to a table-top Wire

Wood screw two places

Securing to a Wall

1.Keep the Plasma television 4 inches away from the wall except when mounted using the wall mount bracket.

2.Secure the television to the wall as shown.

A

 

A

42"

4 in.

 

10 cm

50"

4 in.

 

10 cm

55"

4 in.

 

10 cm

*Please adjust the wire length to avoid touching the wall when turning the TV.

NOTES: 1. Do not block the ventilation holes of the Plasma Television. Blocking the ventilation holes might cause fire or defect.

2.In case of an abnormal symptom, unplug the AC cord.

3.If you purchased the wall mount bracket option, please ask for professional installer. Do not install by yourself.

4.Install the unit at a proper area where it does not expose anyone to any danger of hitting

themselves (for example their hands, head or face, etc.) against the edge of the unit and cause personal injury.

Caution when moving the main unit

As this product is heavy, whenever it is moved, two people arerequired to transport it safely. Whenever the unit is moved it should be lifted forward using the top

and base on both sides of the Television for stability. When moving the Television, lift the handles , then support the top frame as shown below.

55”

NOTE: The TableTop Stand for model P55T551 is not included (Optional).

ANTENNA

Unless your Plasma Television is connected to a cable TV system or to a centralized antenna system, a good outdoor color TV antenna is recommended for best performance. However, if you are located in an exceptionally good signal area that is free from interference and multiple image ghosts, an indoor antenna may be sufficient.

LOCATION

Select an area where sunlight or bright indoor illumination will not fall directly on the picture screen. Also, be sure that the location selected allows a free flow of air to and from the perforated back cover of the set. In order to prevent an internal temperature increase, maintain a space of 10 cm (4 inches) from the

sides/back of the Television, and 30 cm (12 inches) from the top of the television to the ceiling. To avoid

cabinet warping, cabinet color changes, and increased chance of set failure, do not place the TV where temperatures can become excessively hot, for example, in direct sunlight or near a heating appliance, etc.

 

30 cm (12 inches)

10 cm (4 inches)

10 cm (4 inches)

 

TURNING ANGLE

The maximum turning angle is 30° (left and right). Do not place any objects on the path of the monitor when using the swivel feature.

First time use

 

C

 

 

 

 

 

 

C

D

 

D

42"

10.59 in.

13.93 in.

 

 

27 cm

36 cm

 

 

 

 

 

50"

15 in.

16. 85 in.

 

 

 

38. 1 cm

42.8 cm

 

 

55"

15 in.

16. 85 in.

 

 

38. 1 cm

42.8 cm

42”

50”

 

 

 

 

5

Page 5
Image 5
Hitachi P42T501 How To Set Up Your New Hitachi Plasma Television, First time use, Securing to a table-top, Antenna