Hitachi CP-X2521WN, CP-X3021WN user manual Wired Setup, Other Setup, Crestron e-Control

3. Web Control

3.1 Projector Web Control - Network Settings (continued)

			Item	Description
Wired Setup				Congures the wired LAN settings.
	IP Configuration			Congures network settings.
		DHCP ON		Enables DHCP.
		DHCP OFF		Disables DHCP.
			IP Address	Congures the IP address when DHCP is disabled.
			Subnet Mask	Congures the subnet mask when DHCP is disabled.
			Default	Congures the default gateway when DHCP is disabled.
			Gateway
	DNS Server Address			Congures the DNS server address.
Other Setup				Congures other network settings.
				Set whether to or not to use Crestron e-Control®.
	Crestron e-Control			If you choose Disable, the Logon window of Projector Web
				Control and not the selection window will be displayed at rst
				of the Web Control.

Click the [Apply] button to save the settings.

NOTE • The new conguration settings are activated after restarting the network connection. When the conguration settings are changed, you must restart the network connection. You can restart the network connection by

clicking [Network Restart] on the main menu (41).

• If you connect the projector to an existing network, consult a network

administrator before setting server addresses.

• The WEP Key, WPA passphrase and SSID settings will not be set if the invalid

characters are used.

•The projector does not allow both wireless and wired LAN to be connected to the same network. Do not set the same network address for both wireless and wired LAN.

21