Hitachi CP-X2521WN, CP-X3021WN Connecting with your devices continued, continued on next page

Setting up

Connecting with your devices (continued)

Computer External device

Access

point

USB

wireless adapter (optional)

USB

storage

device

HDMI

USB USB

TYPE A TYPE B

DC5V 0.5A

LAN

AC IN

COMPUTER IN1 COMPUTER IN2

S-VIDEO AUDIO IN1

VIDEO AUDIO IN2

AUDIO OUT MONITOR OUT CONTROL

CAUTION ► Before connecting the projector to a network system be sure to obtain the consent of the administrator of the network.

►Do not connect the LAN port to any network that might have the excessive voltage.

►The designated USB wireless adapter that is sold as an option is required to use the wireless network function of this projector.

►Before removing the USB storage device from the port of the projector, be sure to use the REMOVE USB function on the thumbnail screen to secure your data (83).

►Do not use any extension cable or device when connecting the adapter to the projector. Before you insert or pull out the USB wireless adapter from the projec- tor, turn off the power of the projector and pull out the power cord’s plug from the outlet. Do not touch the USB wireless adapter while the projector is receiving AC power.

►To connect both the LAN cable and USB device to the projector, use a LAN cable that is at on the side where the plug’s wire is visible. Otherwise, both of them cannot be connected correctly, or the wire may break (malfunction).

NOTE • If an oversized USB storage device blocks the LAN port, use a USB extension cable to connect the USB storage device.

(continued on next page)

12