Hitachi CP-X2521WN, CP-X3021WN Temporarily freezing the screen, Temporarily blanking the screen

Operating

Temporarily freezing the screen

1. Press the FREEZE button on the remote control.

The “FREEZE” indication will appear on the screen (however, the indication will not appear when the OFF is selected for the MESSAGE item in the SCREEN menu (49)), and the projector will go into the FREEZE mode, which the picture is frozen.

To exit the FREEZE mode and restore the screen to normal, press the FREEZE button again.

FREEZE button

	VIDEO	COMPUTER	MY SOURCE/
			DOC.CAMERA
	ASPECT	AUTO	SEARCH	BLANK
	MAGNIFY	FREEZE	PAGE	VOLUME
ON			UP
O	FF		DOWN
KEYSTONE		MY BUTTON			MUTE
			

●The projector automatically exits from the FREEZE mode when some control buttons are pressed.

●If the projector continues projecting a still image for a long time, the LCD panel might possibly be burned in. Do not leave the projector in the FREEZE mode for too long.

●Images might appear degraded when this function is operated, but it is not a malfunction.

Temporarily blanking the screen

1. Press BLANK button on the remote control.

The BLANK screen will be displayed instead of the screen of input signal. Please refer to BLANK item in SCREEN menu (47).

To exit from the BLANK screen and return to the input signal screen, press BLANK button again.

●The projector automatically exits from the BLANK mode when some control buttons are pressed.

BLANK button

	VIDEO	COMPUTER	MY SOURCE/
			DOC.CAMERA
	ASPECT	AUTO	SEARCH	BLANK
	MAGNIFY	FREEZE	PAGE	VOLUME
ON			UP
O	FF		DOWN
KEYSTONE		MY BUTTON			MUTE
			

CAUTION ►If you wish to have a blank screen while the projector's lamp is on, use the BLANK function above.

Taking any other action may cause the damage on the projector.

NOTE • The sound is not connected with the BLANK screen function. If necessary, set the volume or mute rst. To display the BLANK screen and mute the sound at one time, use AV MUTE function (57).

28