Hitachi CP-X3021WN, CP-X2521WN user manual Web Control 17 or 3.2 Crestron e-Control

3.Web Control

3.Web Control

You can adjust or control the projector via a network from a web browser on a

computer that is connected to the same network.

NOTE • Internet Explorer® 6.0 or later is required.

•If JavaScript® is disabled in your web browser conguration, you must enable JavaScript® in order to use the projector web pages properly. See the Help les for your web browser for details on how to enable JavaScript®.

•It is recommended that all web browser updates are installed.

•If data is transferred via wireless and wired LAN at the same time, the projector may not be able to process the data correctly.

Refer to the following for conguring or controlling the projector via a web browser. Make sure that your computer and the projector is connected via network, and

then start Web browser.

Enter the projector's IP address into URL input box of the Web browser as the

example below, and then press the Enter key or button.

Example: If the IP address of the projector is set to 192.168.1.10:

Enter “http://192.168.1.10/” into the address bar of the web browser

and press the Enter key or click button. If a correct URL is input, and the

projector and your computer are connected to the same network correctly, the selection window as

shown on the right will be displayed. You can choose to use Projector Web Control or Crestron e-Control® as a tool for controlling the projector. Click one of

them.

For more details, refer to 3.1 Projector

Web Control (17) or 3.2 Crestron e-Control®( 42).

NOTE • If Crestron e-Control in the Network Settings (21) is set to Disable, the selection window above does not appear, but the Logon window of the Projector Web Control is displayed.

•Crestron e-Control®is created using Flash®. You need to install Adobe® Flash® Player on your computer to use Crestron e-Control®.

16