Hitachi CP-X3021WN Item, Description, below is, Service, the Network Guide, Communication Type

OPTION menu

Item Description

Selecting this item displays COMMUNICATION menu.

In this menu, you can congure the serial communication settings of the projector using the CONTROL port.

•Select an item using the cursor buttons ▲/▼. Then pressing the ► button opens the submenu for the setting item you selected. Or, pressing the ◄ button instead of the ► button makes the menu back to the previous one without changing the setup. Each submenu can be operated as

		described above.	below) is
		• When COMMUNICATION TYPE (
		set to OFF, the other items in COMMUNICATION
		menu are invalid.
		• For the function of serial communication, refer to
SERVICE		the Network Guide.
	COMMUNICATION	COMMUNICATION TYPE
(continued)
		Select the communication type for transmission via
		the CONTROL port.
		NETWORK BRIDGE (WIRELESS)
		Ú
		NETWORK BRIDGE (WIRED)
		Ú
		OFF
		NETWORK BRIDGE: Select this type, if it is
		required to control an external device as a
		network terminal, via this projector from the
		computer. Select WIRELESS or WIRED as your
		network connection mode.
		The CONTROL port doesn't accept RS-232C
		commands ( 6. Network Bridge Function in
		the Network Guide)
		OFF: Select this mode to receive RS-232C
		commands using the CONTROL port.

•OFF is selected as the default setting.

•When you select the NETWORK BRIDGE, check the item, TRANSMISSTION METHOD (60).

(continued on next page)

59