Hitachi CP-X3021WN, CP-X2521WN Operating, Adjusting the volume, Temporarily muting the sound

KEYSTONE 1

MY BUTTON 2

MUTE

MY SOURCE/

DOC.CAMERA

BLANK

VOLUME

DOWN

Operating

Operating

Adjusting the volume

VOLUME +/- button

1. Use the VOLUME +/VOLUME - buttons to adjust the volume. A dialog will appear on the screen to aid you in adjusting the volume. If you do not do anything, the dialog will automatically disappear after a few seconds.

VIDEO

ASPECT AUTO

MAGNIFY FREEZE ON

OFF

● When is selected for current picture input port, the volume adjustment is disabled. Please see AUDIO SOURCE item of AUDIO menu (46).

●Even if the projector is in the standby mode, the volume is adjustable when both of the following conditions are true:

-An option other than is selected for STANDBY in the AUDIO SOURCE item of the AUDIO menu (46).

-NORMAL is selected in the STANDBY MODE item of the SETUP menu (45).

●In the standby mode, the volume of the microphone is adjustable with the VOLUME +/- buttons on the remote control, in synchronization with the volume of the projector.

Temporarily muting the sound

1. Press MUTE button on the remote control.

A dialog will appear on the screen indicating that you have muted the sound.

To restore the sound, press the MUTE, VOLUME + or VOLUME - button. Even if you do not do anything, the dialog will automatically disappear after a few seconds.

MUTE button

	VIDEO	COMPUTER MY SOURCE/
		DOC CAMERA
	ASPECT	AUTO		BLANK
	MAGNIFY	FREEZE		VOLUME
ON			UP
O	FF		DOWN
KEYSTONE		1 MY BUTTON 2			MUTE

●When is selected for current picture input port, the sound is always muted. Please see AUDIO SOURCE item of AUDIO menu (46).

●C.C. (Closed Caption) is automatically activated when sound is muted and an input signal containing C.C. is received. This function is available only when the signal is NTSC for VIDEO or S-VIDEO, or 480i@60 for COMPUTER IN1 or COMPUTER IN2, and when AUTO is selected for DISPLAY in the C.C. menu under the SCREEN menu (52).

21