Hitachi CP-X3021WN, CP-X2521WN user manual Computer, Auto Ù Sync on G OFF, Frame Lock, On Ù OFF

INPUT menu

Item Description

The computer input signal type for COMPUTER IN1 and IN2 ports can be set.

(1)Use the ▲/▼ buttons to select the COMPUTER IN port to be set.

(2)Use the ◄/► buttons to select the computer input signal type.

COMPUTER IN	AUTO Ù SYNC ON G OFF
	• Selecting the AUTO mode allows
	you to input a sync on G signal or component video signal from the
	port ( 11, 13).

•In the AUTO mode, the picture may be distorted with certain input signals. In such a case, remove the signal connector so that no signal is received and select the SYNC ON G OFF, and then reconnect the signal.

Set the frame lock function on/off for each port.

(1) Use the ▲/▼ buttons to select the input ports.

(2) Use the ◄/► buttons to turn the frame lock function on/off .

FRAME LOCK

ON Ù OFF

•This item can be performed only on a signal with a vertical frequency of 49 to 51Hz, 59 to 61 Hz.

•When ON is selected, moving pictures are displayed more smoothly.

(continued on next page)

41