Hitachi CP-X3021WN, CP-X2521WN When Sntp is enabled Date/Time Settings in the Network Guide

NETWORK menu

Item		Description
		Use the ▲/▼ buttons to enter the TIME
		DIFFERENCE.
		Set the same TIME DIFFERENCE as the one
		set on your computer. If unsure, consult your IT
	TIME	manager.
	DIFFERENCE	Use the ► button to return to the menu after
		setting the TIME DIFFERENCE.
		• When this item is set, the same item in the
		WIRELESS SETUP menu is overwritten with the
		same setting ( 64).
WIRED SETUP		Use the ▲/▼/◄/► buttons to enter the Year (last
(continued)		two digits), Month, Date, Hour and Minute.

•When this item is set, the same item in the WIRELESS SETUP menu is overwritten with the same setting (65).

DATE AND	• The projector will override this setting and retrieve
	DATE AND TIME information from the Time server
TIME
	when SNTP is enabled. ( 3.1.8	Date/Time
	Settings in the Network Guide)

•This setting will be reset if the projector is turned off while STANDBY MODE in the SETUP menu is set to SAVING (45), or when the AC power is turned off.

Selecting this item displays the WIRED INFORMATION dialog for viewing the wired LAN settings.

WIRED

INFORMATION

•For details of PASSCODE, refer to the manual for “LiveViewer”.

•Only the first 16 characters of the PROJECTOR NAME are dis- played.

•IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate “0.0.0.0” when DHCP is ON and the projector has not gotten address from DHCP server.

(continued on next page)

69