Hitachi CP-X2521WN, CP-X3021WN user manual Command Control via the Network continued

7. Other Functions

7.4 Command Control via the Network (continued)

When the authentication setting is enabled, the following settings are required. (32)

7)Click the [Security Settings] on the main menu.

8)Click the [Network Control] and enter the desired authentication password.

*See NOTE.

9)Click the [Apply] button to save the settings.

NOTE • The Authentication Password will be the same for Network Control Port1 (Port: 23), Network Control Port2 (Port: 9715), PJLink™ Port (Port: 4352), My Image Port (Port: 9716) and Messenger Port (Port: 9719).

•The new conguration settings are activated after restarting the network connection. When the conguration settings are changed, you must restart the network connection. You can restart the network connection by clicking the

[Network Restart] on the main menu(41).

63