Hitachi CP-X3021WN, CP-X2521WN user manual OFF. OPTION menu in the Operating Guide

3.Web Control

3.1Projector Web Control - Alert Settings (continued)

The Alert Items are shown below.

Item	Description
Alarm Time	Congures the time to alert.
	(Only Lamp Time Alarm and Filter Time Alarm.)
SNMP Trap	Click the [Enable] check box to enable SNMP Trap alerts.
Send Mail	Click the [Enable] check box to enable e-mail alerts.
	(Except Cold Start and Authentication Failure.)
	Congures the subject line of the e-mail to be sent.
Mail Subject	The length of the subject line can be up to 100 alphanumeric
	characters.
	(Except Cold Start and Authentication Failure.)
	Congures the text of the e-mail to be sent.
	The length of the text can be up to 1024 alphanumeric
Mail Text	characters, but if you are using some of special characters
	below the length may be shorter.
	Special characters " ' : & , % \ and space
	(Except Cold Start and Authentication Failure.)

Click the [Apply] button to save the settings.

NOTE • The trigger of Filter Error e-mail is depending on the FILTER MESSAGE setting in the SERVICE item of the OPTION menu which denes the period until the lter message is displayed on the projector screen. An e-mail will be sent when the usage time of the lter exceeds the time limit that is set. No notication e-mail will be sent if the FILTER MESSAGE is set to TURN

OFF. (OPTION menu in the Operating Guide)

•Lamp Time Alarm is dened as a threshold for e-mail notication (reminder) of the lamp time. When the lamp hour exceeds this threshold that is congured through the Web page, the e-mail will be sent out.

•Filter Time Alarm is dened as a threshold for e-mail notication (reminder) of the lter time. When the lter hour exceeds this threshold that is congured in the Web page, the e-mail will be sent out.

26