Hitachi CP-X3021WN, CP-X2521WN user manual Input menu, TV Ù Film Ù OFF, Video NR, High Ù MID Ù LOW

INPUT menu

INPUT menu

From the INPUT menu, items shown in the table below can be performed.

Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table.

Item

Description

Using the ▲/▼ buttons switches the progress mode.

TV Ù FILM Ù OFF

•This function works only for a video signal, s-video signal, component video signal (of 480i@60 or 576i@50 or 1080i@50/60) and an HDMITM

PROGRESSIVE signal (of 480i@60 or 576i@50 or 1080i@50/60).

VIDEO NR

•When TV or FILM is selected, the screen image will be sharp. FILM adapts to the 2-3 Pull-Down conversion system. But these may cause a certain defect (for example, jagged line) of the picture for a quick moving object. In such a case, please select OFF, even though the screen image may lose sharpness.

Using the ▲/▼ buttons switches the noise reduction mode.

HIGH Ù MID Ù LOW

• This function works only for a video signal, s-video signal, component video signal (of 480i@60 or 576i@50 or 1080i@50/60) and an HDMITM signal (of 480i@60 or 576i@50 or 1080i@50/60).

Using the ▲/▼ buttons switches the mode for color space.

AUTO Ù RGB Ù SMPTE240 Ù REC709 Ù REC601

• This item can be selected only for a computer signal (except for COLOR SPACE signals from the LAN, USB TYPE A and USB TYPE B ports) or a

component video signal.

•The AUTO mode automatically selects the optimum mode.

•The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO.

(continued on next page)

39