Hitachi CP-X2521WN, CP-X3021WN user manual Arrangement continued

Setting up

Arrangement (continued)

WARNING ►Install the projector where you can access the power outlet easily. If an abnormality should occur, unplug the projector urgently. Otherwise it could cause a re or electric shock.

►Do not subject the projector to unstable conditions. If the projector falls or topples over, it could result in injury or damage to the projector and the surrounding things. Using a damaged projector could result in a re and an electric shock.

•Do not place the projector in unstable places, such as an inclined surface, places subject to vibration, on top of a wobbly table or cart, or a surface that is smaller than the projector.

•Do not put the projector on its side, front or rear position.

•Do not attach nor place anything on the projector unless otherwise specied in the manual.

•Do not use any mounting accessories except the accessories specied by the manufacturer. Read and keep the manuals of the accessories used.

•For special installation such as ceiling mounting, be sure to consult your dealer beforehand.

►Do not install the projector near thermally conductive or flammable things. Such things when heated by the projector could result in a re and burns.

• Do not place the projector on a metal stand.

►Do not place the projector where any oils, such as cooking or machine oil, are used. Oil may harm the product, resulting in malfunction, or falling from the mounted position.

►Do not place the projector in a place where it may get wet. Getting the projector wet or inserting liquid into the projector could cause a re and an electric shock, and damage the projector.

•Do not place the projector near water, such as in a bathroom, kitchen, or poolside.

•Do not place the projector outdoors or by the window.

•Do not place anything containing liquid near the projector.

(continued on next page)

8